Latest
- New
- New
- Out-of-Stock
Arctic P12 12cm Pressure Optimised PWM PST RGB 0dB Case Fan, Black, Fluid Dynamic, 12 RGB LEDs, 0-2000 RPM
£14.31
VAT included
Semi-Passive 120 Fan with Analog RGB
RGB For Full Colours
The P12 PWM PST RGB 0dB has 12 analogue RGB LEDs in the fan barrel. These can be controlled uniformly and are compatible with the common RGB standards of leading motherboard manufacturers. The fan can thus be fully illuminated directly via the RGB mainboard connection or via an external controller and synchronised with the illumination of other hardware.
0dB Mode - Zero RPM
The speed of the P12 PWM PST RGB 0dB can be throttled to a standstill via PWM. This allows for silent operation in IDLE and at the same time guarantees maximum performance when needed.
Maximum Smoothness Minimum Vibration
The operating noise of the newly developed ARCTIC motor is barely perceptible even at the lowest speed. In addition the P12 PWM PST RGB 0dB has rubberised contact surfaces and thus reduces audible vibrations to a minimum.
Optimised For High Static Pressure
The P12 PWM PST RGB 0dB operates with a focused airflow and a high static pressure. The fan thus guarantees extremely efficient cooling even with increased air resistance and is therefore suitable for use on heat sinks radiators and filters.
0 to 2000 RPM Controlled Via PWM PST
With a wide speed range and the innovative PWM Sharing Technology (PST) the fan speed of the P12 PWM PST RGB 0dB can be controlled synchronously with all other fans. This reduces noise to a minimum while guaranteeing maximum cooling performance.
High Quality Plain Bearing
Thanks to an alloy/lubricant combination developed in Germany friction within the bearing is reduced and greater efficiency is achieved. In this way less heat develops less bearing noise is generated and the service life of the fan is extended.
- Type: 12cm Case Fan
- AMD/Intel: N/A
- Fan Connector(s): 4-pin
- LED Lighting: Yes
- Colour: Black
- LED Lighting: 12 analogue RGB LEDs in fan barrel
Compatible with leading motherboard manufacturers
4-Pin 12 V-G-R-B Connector + 4-Pin Socke - Material: Rubberised contact surfaces
- Weight: 131 g
- Fan Dimensions: 120 x 120 x 25 mm
- Fan Controller: PWM
- Rotation Speed: 0 - 2000 RPM
- Fan Bearing: Fluid Dynamic bearing
- Air Flow: "48.8 CFM | 8291 m3/h"
- Noise level: 0dB mode
- Power: Fan:
Typical Voltage: 12 V DC
Current: 0.11 A
RGB:
Typical Voltage: 12 V
Current: 0.2 A - Additional Features: See Overview
- Package Type: Retail
- Package Weight: 0.1990 kg
- Warranty: 6 Years
ACFAN00186A
Data sheet
- LED Lighting
- 4 Pin RGB
- Pack Size
- 1
- Connector Type
- 4 Pin (PWM)
Comments (0)